Stains are used on many types of floors, including but not limited to commercial, residential, and industrial floors. They provide a tough protective coating that resists damage and will also add beauty to any floor. Find local concrete staining contractors in your area.
There are several different methods of staining concrete surfaces. The type of stain you choose depends on the type of surface you have and the material’s color. A minimum required amount of pigment is added for a particular surface to attain a beautiful staining process. Some stains will need more paint than others, and you will want to know the color requirements before starting the process of Stain Concrete Floors.
It is essential to follow all of the instructions for any staining process to get the best results and keep your garage or workroom clean. Any dirt particles must be removed before the staining process begins. Once the surface has been cleaned and any required residue removed, you can begin the actual staining process.
In order to properly color your concrete surface, you will need to use a paint that is specifically designed for use on concrete surfaces. There are some brands of paint that will not bond to concrete surfaces so you must choose a paint designed for this purpose. This is especially important if you are going to use the paint on a wall because it may cause peeling or cracking.
The base coat of any stain concrete floors project must be a water-based silicone or oil-based sealer. The purpose of this coat is to provide a watertight barrier to prevent oils and waxes from penetrating the surface. The purpose of silicone or oil-based sealer is to not allow any dirt or liquids to penetrate the sealer. These liquids can be very slick and if they do get through the sealer may actually make the floor even more slippery.
For this reason, many people choose to stain their floors with a wax coating. Waxed flooring products provide a very slick surface to walk on and it will not get stuck in crevices as much. These products are also highly absorbent, which means that they are great for cleaning up oil spills or wax spills. They will not stand up to grease or oil stains as a sealer would. The disadvantage to waxing your concrete basement floor is that it can become slick when the temperature changes.
Acid stain concrete floors can be a little trickier to deal with. The acid in the concrete floor mix will react with any natural oils or waxes in the flooring and actually “eat” them away. This is not necessarily a bad thing but it does have to be prevented by applying wax to the entire floor. The wax will act as an antioxidant helping to protect the floor from further oxidation.
There are many different interiors and exterior flooring options that you can use for staining your concrete floors. You will want to take into account the type of traffic on the floor as well as the weather conditions when choosing the right product for you. By keeping these few things in mind you will be ready to get started on your new interior decorating project.
Interior Stained Concrete Floors – One of the most popular ways to go about staining interior concrete floors is with a low-bulk, exterior grade acid stain sealer. These sealers are much more difficult to remove than their interiors counterparts due to the higher degree of bonding they have with the flooring. Because of this, the acid sealer must be allowed to sit on the floor for at least 48 hours before being scrubbed away with a power washer. After the sealer has been scraped away, you can then use a high-quality exterior dust/polish combination to give your floors a completely new look. These floors typically require a minimum of two coats to be properly maintained.
Exterior Stained Concrete Floors – Because of the nature of the staining process, these types of stains are usually not very hard to remove. A clean, mildew neutralizer is all that is needed to remove the previous stain and allow the newly applied sealant to become bonded to the surface. The neutralizer should be used in conjunction with a high-quality floor cleaner in order to prevent excessive staining. Then the cleaner will be able to simply scrub away any excess residue or dirt that remained after using the neutralizer.
Stain Concrete Floor Solutions With proper maintenance you can effectively protect your floors from getting damaged from excess traffic and other elements that may damage your floors. If you do not have the time or desire to maintain your floors this may not be an option for you. There are a number of professional floor cleaning companies that can professionally restore your floors to a near new appearance through a process known as an infra-red light treatment. This process is achieved by exposing your floors to an ultra-bright light that fades the color of the stain over a period of two coats.